Trong mạng lưới phân phối đô thị, tòa nhà cao tầng, vận chuyển đường sắt, trung tâm dữ liệu và nhà máy công nghiệp, máy biến áp loại khô đang dần thay thế máy biến áp ngâm trong dầu truyền thống như là lựa chọn chủ đạo cho phân phối điện "trung tâm phụ tải". Trong số đó, máy biến áp loại khô đúc nhựa epoxy SC(B)10 / SC(B)11 / SC(B)12-10kV (20kV), là sản phẩm chuyển tiếp thế hệ thứ ba điển hình trong hệ thống GB/T 10228 và GB 1094.11, mang giai đoạn quan trọng của quá trình chuyển đổi từ "mô hình tiêu thụ năng lượng cao cũ" sang "mô hình tiết kiệm năng lượng tiêu chuẩn quốc gia mới".
I. Core technology and structural characteristics
SC(B) series dry-type transformers adopt advanced vacuum casting technology, the core of which is to pour a thin layer of filled F-class or H-class epoxy resin mixture inside and outside the high and low voltage coils under vacuum and pressure. This process allows the coil to form a solid cylindrical whole after solidification, with extremely high mechanical strength, electrical strength and heat resistance.
In terms of winding design, high-voltage windings are usually made of high-quality oxygen-free copper wires and embedded with resin heat dissipation air channels; low-voltage windings are mostly made of copper foil and combined with glass fiber reinforced materials to make them extremely resistant to short circuits. In addition, the core adopts high-quality cold-rolled silicon steel sheets and a fully oblique joint step-overlap process, which effectively improves the magnetic flux density distribution and significantly reduces no-load loss and operating noise.
This type of product adopts vacuum degassing + pressure thin layer casting process. The high and low voltage coils are integrally encapsulated and solidified by epoxy resin under the reinforcement of glass fiber mat, forming a "reinforced glass fiber reinforced plastic"-like overall stress structure:
II. Model decoding: What does SC(B)10/11/12 stand for?
According to common naming rules in the industry:
S——Three-phase transformer
C —— Epoxy resin cast insulated dry structure (different from SG open impregnated type)
B——The low-voltage winding is made of copper foil (foil winding, high mechanical strength and good ampere-turn balance)
10 / 11 / 12 —— Design serial number, which is also the no-load loss level code. The larger the number, the lower the loss.
10kV / 20kV——High voltage side rated voltage level, 20kV is mostly used for urban ring network or park dedicated line
(B) can be omitted - no B means low-voltage wire winding, with B means low-voltage foil winding, SCB type is more common in engineering
The suffix number is not the energy efficiency level of the new national standard, it is just the manufacturer’s design serial number. SCB10 has fallen below level 3 energy efficiency under the new national standard GB 20052-2024, and new projects are prohibited from entering the network; SCB11 also does not meet the standard; SCB12 corresponds to the entry bottom line of the new national standard level 3 energy efficiency (NX3).
III. Comparison of typical parameters of 10kV and 20kV (taking 1000kVA as an example)
|
Model |
Voltage combination |
No-load loss (W) |
Load loss (W) |
Insulation/protection |
New national standard energy efficiency |
|
SC(B)10-1000 |
10±2×2.5%/0.4 |
1770 |
8130 |
Class F/IP20 |
Eliminated (<3 level) |
|
SC(B)11-1000 |
10kV |
1547 | 8130 |
Class F/IP20 |
Not recommended (<3 level) |
|
SC(B)12-1000 |
10kV |
about 1410 | 8130 |
Class F/IP20 |
Level 3 (Admissible) |
|
SC(B)10-1000(20kV) |
20±2×2.5%/0.4 |
— |
— |
Class F |
Eliminated |
Data source: GB/T 10228 sample parameters, SCB11 is about 10%~15% lower than SCB10 at no load, SCB12 is about 20% lower than SCB10 at no load, and the load loss of the three generations is basically the same at the same insulation temperature.
Due to the higher insulation level of the 20kV class (power frequency withstand voltage 50kV, lightning surge 125kV), the number of coil layers, pouring thickness, and creepage distance are all enlarged. The volume and weight ratio of the 10kV class at the same capacity is about 15% to 25%.
IV. Application differences between 10kV and 20kV voltage levels
This series of products covers two mainstream voltage levels of 10kV and 20kV, each with its own emphasis in practical applications:
10kV products: It is currently the most widely used power distribution voltage level, with capacities ranging from 30kVA to thousands of kVA. It is suitable for terminal power distribution in most conventional commercial, industrial and residential areas.
Sản phẩm 20kV: Là sản phẩm chuyển đổi và phân phối điện được Lưới điện Nhà nước và Lưới điện tỉnh khuyến nghị, cấp điện áp 20kV nằm trong khoảng từ 10kV đến 35kV. Ưu điểm cốt lõi của nó là bán kính cung cấp điện dài hơn, độ sụt điện áp đường dây nhỏ hơn, tổn thất đường dây thấp hơn và có thể giảm đáng kể mức tiêu thụ kim loại màu. Máy biến áp khô 20kV khắc phục hiệu quả những khuyết điểm của đường dây phân phối 10kV, đặc biệt phù hợp với các khu công nghiệp lớn, khu phát triển thành phố mới và các trạm biến áp trung tâm có nguồn điện đường dài.
V. Excellent safety and environmental adaptability
Máy biến áp loại khô dòng SC(B) được gọi là "máy biến áp xanh" và độ an toàn của chúng được phản ánh ở nhiều khía cạnh. Trước hết, các vật liệu cách nhiệt như nhựa epoxy và sợi thủy tinh có đặc tính chống cháy và tự dập tắt tuyệt vời. Chúng sẽ không tạo ra khí độc hại trong điều kiện ngắn mạch hoặc nhiệt độ cao, loại bỏ nguy cơ hỏa hoạn. Thứ hai, do sử dụng vật liệu cách nhiệt rắn nên cuộn dây không hút ẩm, lõi sắt và kẹp có lớp bảo vệ chống ăn mòn đặc biệt, giúp nó hoạt động ổn định trong môi trường có độ ẩm tương đối 100% và các môi trường khắc nghiệt khác. Không cần hút ẩm trước khi đưa vào vận hành hoặc trong quá trình vận hành không liên tục.
Ngoài ra, dòng sản phẩm này còn có khả năng chống quá tải và chống sét cực mạnh. Trong điều kiện làm mát không khí tự nhiên (AN), nó có thể hoạt động ở mức tải định mức 120% trong thời gian dài; nếu được trang bị hệ thống làm mát không khí cưỡng bức (AF), khả năng quá tải có thể tăng thêm lên 150%, cung cấp đủ giới hạn an toàn cho tải trọng lớn đột ngột.
VI. Typical applicable scenarios
With the comprehensive advantages of flame retardant, explosion-proof, moisture-proof, maintenance-free and can be installed directly in load centers, SC(B)10/11/12 series transformers are widely used in the following places:
To sum up, SC(B)10/11/12 series epoxy resin cast dry-type transformers play an indispensable role in modern power systems with their mature technology, continuously iterative energy efficiency levels and extremely high safety and reliability. As the country's requirements for energy conservation and environmental protection continue to increase, this series of products will surely play greater value in future smart grid construction.
